• 10/100/1000Mbps PCI Adapter
• Complies with IEEE 802.3/802.3u/802.3ab Ethernet Standard
• Supports 32-bit 33/66MHz PCI Bus
• Supports 10/100/1000Mbps Nway Auto-Negotiation
• Supports 10/100Mbps full and half duplex, 1000Mbps full duplex
• Supports Full Duplex Flow Control (IEEE 802.3x)
• Supports IEEE 802.1P, IEEE 802.1Q VLAN tag
• Supports Jumbo Frame
• Supports Auto-MDI/MDIX
• Provides Bootrom slot, supporting remote boot
• Supports ACPI, PCI power management
• Contain two large independent receive and transmit FIFOs
• One STP/UTP connector
• Provides LEDs to indicate network Link/Activity/Speed/Duplex
• Windows98/98se/2000/ME/NT/XP/2003/VISTA/Novell Netware/LINUX
• Plug and Play

TG-3269 is a 10/100/1000Mbps, 32-bit 33/66MHz PCI-bus Gigabit Ethernet adapter. With single UTP/STP and the Auto-Negotiation (Nway) function support, the Card can auto-negotiate 10Mbps, 100Mbps or 1000Mbps speed, and half or full duplex mode with its link partner (a hub, for example). Supports ACPI, compliant with PCI2.2. Full range of drivers are provided for major Operating Systems.

Standards and Protocols: IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.1q, 802.1p, CSMA/CD, TCP/IP, PCI Revision 2.1/2.2
Interface: 32-bit PCI
Transmission Rate:
10/100Mbps for Half-Duplex mode
20/200/2000Mbps for Full-Duplex mode
Flow Control: IEEE 802.3x Flow Control (Full-Duplex)
Jumbo Frame: 7680Bytes
Port: 10/100/1000Mbps RJ45
Slot: 1 BOOTROM slot
Network Media:
10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
100BASE-TX: UTP category 5, 5e cable (maximum 100m)
EIA/TIA-568 100Ω STP (maximum 100m)
1000Base-T: UTP category 5, 5e cable (maximum 100m)
LED Indicator: 1000M Link/Act, 100M Link/Act, 10 Link/Act, Duplex
Safety & Emission: FCC, CE
Environment:
Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
Operating System: Windows98/98se/2000/ME/NT/XP/2003/VISTA/Novell Netware/LINUX